Changing the DNS server settings in your router isn’t that difficult, however every manufacturer uses their own custom interface, which means that the process might be extremely different depending on the router you own.
Below you will discover the exact steps needed to change the DNS servers in your make of router. We just have probably the most popular router brands listed at this time, however you also may expect the list to be expanding soon.
Notice: Changing the DNS servers onto your router, instead of your individual devices, is almost always a better idea however, you might want to look at our The way to Change DNS Server Settings: Router compared to PC at a better comprehension of why which is.
Linksys
Change the DNS servers onto your Linksys router from the Setup menu:
- Sign into your Linksys router’s web-based administration, usually http://192.168.1.1.
- Tap or Harness Setup from the top menu.
- Tap or click Basic Setup from the Setup submenu.
- From the Static DNS inch field, enter the primary DNS server you’d like to use.
- From the Static DNS two field, enter the secondary DNS server you may like to use.
- The Static DNS 3 field could be left blank, or you’ll be able to incorporate a primary DNS server from another provider.
- Tap or click on the Save Settings button at the bottom of the screen.
- Tap or click on the Carry on button onto the next screen.
- Most Linksys routers do not require a restart to all these DNS server changes to take effect, but make sure you achieve this in case the router admin page requests you to.
Watch our Linksys Default Password List in case 192.168.1.1 did not work for you. Perhaps not many Linksys routers use that address, so you can try different router login IP like: 10.0.0.0.1 (Click here to know more), 10.0.0.1, 192.168.254.1 and more.
Linksys makes minor changes with their administration page whenever that they release a fresh collection of routers, thus when the procedure above did not work with you exactly, the instructions that you need will likely be on your manual.
NETGEAR
Change the DNS servers onto your NETGEAR router from the Basic Settings or even Internet menu, depending on your model:
- Sign into your NETGEAR router manager page, most commonly via http://192.168.1.1 or even http://192.168.0.1.
- NETGEAR includes two major interfaces using different ways of performing the next thing:
- for those who have a BASIC along with advanced level tab on the top, choose the Basic accompanied with your Internet option (on the left).
- If you don’t have those two tabs along the top, choose Basic Settings.
- Choose the Use These DNS Servers option below the Domain Name Server (DNS) Address section.
- From the Primary DNS area, enter the primary DNS server you’d like to use.
- From the Secondary DNS area, use the secondary DNS server you’d like to use.
- In case your NETGEAR router gives you a Third DNS field, you are able to leave it blank or choose a primary DNS server from another provider.
- Tap or Tap Apply to conserve DNS server changes that you just entered.
- Follow any additional prompts about restarting your router. In the event you never get some, your changes should now be live.
- NETGEAR routers have used a number of different default gateway addresses through the years, therefore in case 192.168.0.1 or even 192.168.1.1 did not work with you, locate your model within my own NETGEAR Default Password List.
While the process outlined above should work with most NETGEAR routers, there might be described as a model or two which use a different method.
D-Link
Change the DNS servers onto your D-Link router from the Setup menu:
- Sign into your D-Link router using http://192.168.0.1.
- Choose the Internet option on the left side of the page.
- Select the Setup menu from the top of the page.
- Locate the Dynamic IP (DHCP) Internet Connection Type section and use this Primary DNS Address area to enter the primary DNS server that you want to use.
- Use the Secondary DNS Address area to type from the secondary DNS server that you want to use.
- Choose the Save Settings button at the top of the page.
- The DNS server settings should have changed instantly nevertheless, you might be told to reboot the router to complete the changes.
- While most D-Link routers might be retrieved via 192.168.0.1, a few of their models use a different one by default. If this address did not work with you, visit our D-Link Default Password List to come across your specific model’s default IP address (as well as also the default password for logging on, even if you need it).
TP-LINK
Change the DNS servers onto your TP-LINK router through the DHCP menu:
- Sign into your TP-LINK router’s configuration page, usually via the http://192.168.1.1 address, however sometimes via http://192.168.0.1.
- Choose the DHCP option from the menu to your leftside.
- Tap or click on the DHCP submenu option Named DHCP Settings.
- Use the Primary DNS area to enter the primary DNS server you’d like to use.
- Use the Secondary DNS area to enter the secondary DNS server you’d like to use.
- Choose the Save button at the bottom of the page to store the changes.
- You probably do not have to restart your router to automatically apply those DNS settings, however some TP-LINK routers will require it.
One particular two IP addresses above, in addition to the tutorial as summarized, should work with most TP-LINK routers. Otherwise, perform an internet search for your TP-LINK model at TP-LINK’s support page. On your router’s manual is going to soon be the default IP you should use to connect, in addition to details on the DNS-change procedure.
Cisco
Change the DNS servers on your Cisco router from the LAN Setup menu:
- Sign into your Cisco router out of http://192.168.1.1 or even http://192.168.1.254, depending upon your router model.
- Just click on or tap on the Setup option from the menu in the top of the page.
- Choose the Lan Setup tab from the menu that is just below the Setup option.
- From the LAN inch Static DNS inch field, enter the primary DNS server you’d like to use.
- From the LAN inch Static DNS two field, use the secondary DNS server you’d like to use.
- Some Cisco routers might have a LAN inch Static DNS 3 field, that you are able to leave blank, or enter still another DNS server.
- Save changes using the Save Settings button at the bottom of page.
- Some Cisco routers are going to have you restart the router to automatically apply the changes. Otherwise all the changes have been applied correctly after choosing Save Settings.
Having difficulty with the directions? Visit our Cisco Support page to get assistance choosing the manual which belongs along with your exact Cisco router model. Some models require slightly different measures to attain the DNS server settings however your manual is going to likely be 100% appropriate to your model.
In the event that you can’t actually open your Cisco router’s configuration page using one of those addresses from above, make sure you look through our Cisco Default Password List to your default IP address, in addition to additional default log in data, for your specific Cisco router.
Notice: These steps will probably be different for your router for those who have a co-branded Cisco-Linksys router. If your router gets got the term Linksys onto it follow the steps at the very top of this page for changing the DNS servers on a Linksys router.
Belkin
Change the DNS servers onto your Belkin router by simply opening up the DNS menu:
- Sign into your Belkin router through the address http://192.168.2.1.
- Select DNSbeneath the Internet WAN section from the menu to your leftside.
- From the DNS Address area, enter the primary DNS server you’d like to use.
- From the Secondary DNS Address area, use the secondary DNS server you’d like to use.
- Click or tap the Apply Changes button to store changes.
- You can be told to restart your router for those changes to take effect – just stick to the on-screen prompts in case .
- It’s possible to reach almost all Belkin routers using 192.168.2.1 however there are probably some exceptions where the different address can be used by default. In case that IP address will not work with youpersonally, the specific one which should really be used for your model is discovered on Belkin’s support page.
Didn’t See Your Router Maker?
As of this writingwe only have the most popular router makers in this list but we’ll be adding DNS change instructions for Amped Wireless, Apple, CradlePoint, Edimax, EnGenius, Foscam, Gl.iNet, HooToo, JCG, Medialink, Peplink, RAVPower, Securifi, and Western Digital routers soon.